If you own a Nespresso VertuoLine machine and want to ensure that you consistently get a perfect cup of coffee, then it’s important to know how to descale your machine. In this helpful Nespresso Assistance video, you’ll learn all the steps you need to take in order to effectively descale your VertuoLine machine. The video will guide you through the process, starting with opening the machine and allowing the used capsule to be ejected. You’ll then be shown how to empty the capsule container and drip tray, and fill the water tank with the appropriate amount of water and Nespresso Descaling solution. By following these simple instructions, you’ll be able to perform the descaling operation in just 20 minutes, ensuring that your VertuoLine machine is properly cleaned and ready to brew your favorite blends.
Preparation
Before you start the descaling process, there are a few things you need to do to prepare your VertuoLine machine. Follow these steps to ensure a smooth and successful descaling process:
Open the machine and eject the used capsule
Start by opening the machine and removing any used capsules. Eject the used capsule into a trash bin or designated disposal area. This will ensure that your machine is ready for the descaling process.
Empty the capsule container and drip tray
Next, empty the capsule container and drip tray. These parts of the machine can collect residue and build-up over time, so it’s important to clean them out before descaling. Simply remove the capsule container and drip tray, empty any contents, and give them a quick rinse if necessary.
Fill the water tank with water and descaling solution
Now, it’s time to fill the water tank with a mixture of water and descaling solution. Follow the instructions provided with the descaling kit that is specially designed for your Nespresso machine. Typically, you’ll need to mix a certain amount of descaling solution with a specific volume of water. Pour this mixture into the water tank, ensuring that you have enough to complete the descaling process.
Entering Descaling Mode
Once you have completed the preparation steps, you can now enter the descaling mode on your VertuoLine machine. Follow these steps to enter the descaling mode:
Turn on the machine
Start by turning on the machine. This will initiate the preheating phase and prepare the machine for descaling.
Hold the button for at least 7 seconds to enter Descaling mode
To enter the descaling mode, hold down the button on your VertuoLine machine for at least 7 seconds. You will know that you have entered the correct mode when the button starts blinking quickly.
Lock the machine by turning the lever left to the lock symbol
Once in descaling mode, lock the machine by turning the lever to the left, aligning it with the lock symbol. This will ensure that the descaling process can proceed smoothly.
Unlock the machine by turning the lever right
After locking the machine, you will need to unlock it to continue with the descaling process. Simply turn the lever to the right, aligning it with the unlock symbol.
Hold the button again for at least 7 seconds in the unlocked position
To proceed further in the descaling mode, hold down the button on your VertuoLine machine for another 7 seconds while the lever is in the unlocked position. This will indicate that you are ready to start the descaling process.
Place a container under the coffee outlet
Before you start the descaling process, it’s important to place a container under the coffee outlet to catch any liquid that flows out during the process. Make sure the container is large enough to hold at least 20 ounces or 600 milliliters of liquid.
Descaling Process
Now that you have entered the descaling mode and prepared the necessary equipment, you can begin the descaling process. Follow these steps to ensure a thorough descaling:
Block the machine by turning the lever left
To start the descaling process, block the machine by turning the lever to the left, aligning it with the block symbol. This will prevent any liquid from flowing through the machine prematurely.
Push the button to start descaling
Once the machine is blocked, push the button on your VertuoLine machine to start the descaling process. This will initiate the flow of descaling solution through the machine.
Let all the descaling solution flow through the machine
Allow all the descaling solution to flow through the machine until the container under the coffee outlet is empty. This ensures that the entire system is thoroughly descaled and any build-up or residue is removed.
Empty and rinse the water tank, drip tray, and cuff support
Once the descaling process is complete, it’s important to empty and rinse the water tank, drip tray, and cuff support. Remove these parts from the machine and discard any remaining descaling solution. Rinse them thoroughly with fresh water to ensure that no residue or solution is left behind.
Rinsing
After completing the descaling process, it’s time to rinse your VertuoLine machine to remove any remaining descaling solution. Follow these steps for an effective rinse:
Fill more than half of the water tank with fresh drinking water
Fill the water tank of your VertuoLine machine with fresh drinking water. Make sure to fill it more than halfway to ensure that you have enough water for the rinse.
Push the button to rinse the machine
Once the water tank is filled, push the button on your VertuoLine machine to start the rinse cycle. This will initiate the flow of fresh water through the machine, flushing out any remaining descaling solution.
The machine will stop automatically when complete
Your VertuoLine machine will automatically stop the rinse cycle once it is complete. This ensures that the rinse is thorough and any residue from the descaling process is completely removed.
Exiting Descaling Mode
After completing the descaling and rinsing processes, it’s time to exit the descaling mode on your VertuoLine machine. Follow these steps to exit the descaling mode:
Hold the button for at least 7 seconds
To exit the descaling mode, hold down the button on your VertuoLine machine for at least 7 seconds. This will initiate the exit process and bring your machine back to its normal operating mode.
The button will stop blinking quickly and become steady
Once you have held the button for the required amount of time, you will notice that it stops blinking quickly and becomes steady. This indicates that the descaling mode has been successfully exited.
Drying
After completing the descaling and rinse cycles, it’s important to allow your VertuoLine machine to dry before using it. This ensures that any moisture is evaporated and the machine is ready for brewing. Follow these steps to dry your machine:
Allow the machine to dry for 10 minutes before using it
After the descaling and rinse cycles are complete, leave your VertuoLine machine to air dry for approximately 10 minutes. This will ensure that any remaining moisture evaporates and the machine is completely dry before use.
Conclusion
Congratulations! You have successfully descaled your VertuoLine machine. By following these step-by-step instructions, you have ensured that your machine is clean and primed for brewing the perfect cup of coffee. Remember to continue to enjoy the range of grand cru with your VertuoLine machine and savor the ultimate Nespresso coffee quality cup after cup. Cheers!